Do not buy until you talk to us! We can save you cash! 1-866-941-5112

Installing a Wood stove

Categories: Tags:

Are you planning on installing a wood stove this winter?  Is the high price of heating oil making you think about using alternative fuels?  If so you have come to the right place for help installing a wood stove safely.

One of the most important parts of installing a wood stove is making sure your chimney is safe.  To make your chimney the safest it can be, you need to install a stainless steel chimney liner with insulation.  The best chimney liner available is our rigid chimney liner.  If your chimney has bends or turns, we recommend installing the Flex King Pro HD.

The Flex King Pro HD is specifically designed to handle the exhaust of a wood burning appliance.  Installing a wood stove can save you hundreds of dollars on your heating bill.  Let us help you save hundreds of dollars on making your family and chimney safe this winter.

wood stove, chimney liner








    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.
    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.