Unlock a 15% discount on all products with the "15%OFF" discount coupon at checkout. Hurry, as the coupon limit is available—place your order now!

Do not buy until you talk to us! We can save you cash! 1-866-941-5112

Factory Direct Chimney Liners

Categories:

When you buy a chimney liner from chimneylinerdepot.com you are buying factory direct. Our chimney liners are priced low, but the quality is high. We can afford to sell our chimney liners at the prices we do because we control the production costs. We use the highest quality alloys for our chimney liners.

flexible chimney liner

 

If you need a chimney liner, don’t waste your time and money searching the internet for a ‘Killer Deal’. Rest assured, if you find a stainless steel chimney liner for a better price than we offer you are most likely getting an inferior product. Remember you get what you pay for. At first glance all chimney liners look the same. But when it comes down to it, our liners are made of the highest quality stainless steel. Our chimney liner kit components are of the highest quality as well. We go the extra mile for the sake of quality.

When you buy a chimney liner from chimneylinerdepot.com you are getting a product designed to last a lifetime. If for any reason you should need to file a warranty claim, you can rest easy knowing that it will be a painless process.

Burning wood in your chimney

Categories:

Here is a nice video which talks about seasoned firewood. It’s not good to burn wet wood. It will create creosote build-up. Creosote build-up is not good. It can lead to a chimney fire if left unattended. If you have a stainless steel chimney liner in your chimney you still need to clean your wood burning chimney regularly. If you have a corrugated chimney liner the build-up can be more extensive.

Wet wood will burn. It will just burn poorly. It will produce a lot of smoke, and won’t produce as much heat as it should. Many people like to turn dampers down at night so that the fire doesn’t go out while they sleep. This is really a bad idea if you want to keep creosote build-up down.

[tube]http://www.youtube.com/watch?v=lXLQ8Wtbpyc[/tube]

 








    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.

    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.

    THANK YOU FOR ANSWERING THOSE QUESTIONS

    NOW GIVE US A CALL AND SPEAK WITH ONE OF OUR TECHS

    866-941-5112