Unlock a 15% discount on all products with the "15%OFF" discount coupon at checkout. Hurry, as the coupon limit is available—place your order now!

Do not buy until you talk to us! We can save you cash! 1-866-941-5112

Pellet stove fuel is an environment friendly fuel which is renewable as well. Pellet stove fuel is used to power a pellet stove, which is a heating appliance that is very much like a heating stove that uses gas or wood. However unlike these other stoves, pellet stoves are considered to be more environment friendly as pellet stove fuel is easily manufactured and does not use up valuable resources.
Due to the rising costs of electricity, most people find pellet stoves and pellet stove fuel to be a cheaper and more efficient way of heating their homes. Pellet stove fuel can also be used in a gas or wood heater but the most benefit is derived from using it with a pellet stove.

The use of these stoves is often combined with other forms of renewable energy in residential areas to control electric power costs. Sites like www.free-wind-energy.com provide resources and comparisons of plans, and there are many sites that sell kits and complete systems. Decide today to embrace renewable energy of some kind.

Not all pellet stove fuel is the same as the pellets are made from different resources. There are three main types of pellet stove fuel, wood, corn and grass, and each has its own advantages and uses. The quality of pellet stove fuel is measured by the amount of ash that is produced and therefore the lesser ash the higher the quality.

If you are thinking of warming your home with pellet stove fuel then here are a few tips which will help you to be more economical and make your own pellet stove fuel. With the popularity of pellet stoves rising you may find it difficult to obtain pellet stove fuel as well, especially as the days get colder. Therefore one of the best options for you to choose from would be to making your own pellet stove fuel.

To start of with you will need some basic raw materials and a pellet mill. A pellet mill is necessary to bind the raw materials that you chose to make into pellet stove fuel and therefore you will be able to press your raw materials through dies and obtain them in pellet stove fuel form. You can easily purchase a pellet mill for around $2,600.

The raw material that you can use to create pellet stove fuel are numerous and range from wheat, barley star, corn cobs, shelled corn, fruit pits, different types of grass and also cardboard or even paper if you can spare it. The type of raw materials you choose to make your pellet stove fuel out of should be in accordance with the type of fuel your pellet stove needs to operate at its best. Therefore it is best to research the type of pellet stove you have and then work on creating pellet stove fuel to suit its requirements.

Pellet store dealers provide a stove that works the same way as a normal wood stove but instead of burning wood to provide heat, the pellet stove burns what are knows as pellets usually made out of sawdust. They are however mechanical, and therefore contain motors and several other parts that work together to produce heat. It also runs on electricity which means in the event of a power outage, your heating will go off too!

Pellets can be bought in large quantities and usually come in bags, making it easier to store. It is best that you always keep a stock of pellets on hand as you do not want to run out of them on a terribly cold night.

Several popular pellet stove dealers offer them in different types and sizes. You would need to have a good idea of where you wish to place your pellet stove before you start shopping for one. Pellet stove dealers allow you to choose from ones that are free standing or one that can be easily inserted into your existing fire place.








    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.

    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.

    THANK YOU FOR ANSWERING THOSE QUESTIONS

    NOW GIVE US A CALL AND SPEAK WITH ONE OF OUR TECHS

    866-941-5112