Unlock a 15% discount on all products with the "15%OFF" discount coupon at checkout. Hurry, as the coupon limit is available—place your order now!

Do not buy until you talk to us! We can save you cash! 1-866-941-5112

Keeping yourself warm at low maintenance and using natural process that helps you transform sun rays into heat is something really beneficial these days and things like thermofilm and using radiant heat through enerjoy is something really exciting.

Enerjoy is basically a sort of radiant heat panels that are installed in homes for heating purposes and these work completely naturally. This means that once installed these panels have very low maintenance rate and are less susceptible to damage as well.

Radiant heating systems basically look for heat directly. This means that heat is supplied directly to the panels either in the ceilings or the walls of the house and perhaps at times also to the floor. This is the most natural way to stay warm. The entire system is mainly dependent on the radiant heat transfer, which means that the heat will directly get delivered from a hot surface to the receiving ends for example the object or perhaps the people present in the room. The entire process is largely dependent on the infra-red radiations and the warmth that these installations provide can make you feel cosy at any time of the day. If the system of radiant heating is applied through the floor then it is commonly known as radiant floor heating or just plain floor heating.

Using of thermofilms while opting for radiant heat is also a good option as thermofilm will make the heat stay in the room and keep the room warm for longer durations. Infra-red rays or the heat ray is something which is the significant part of the entire process and this is something like a food to the radiant heat panels.  Heat ray can be converted into warmth just by using simple panels and converting the sun rays into great utility. Radiant heat has more advantages than anything else. It is more efficient than anything else and is usually better than the forced heating. The hydraulic systems can also be efficiently heated by using radiant heat panels or simply heat rays which, means less electricity consumption. This is the best to be done in areas with more power losses and this is also good when it comes to your soaring electricity bills.

Solar water heaters and sunjoy – that are air stuffed play areas for children that uses heated air to inflate can use it in a best way. Radiant floor systems are different from radiant heating panels in a lot many ways. So before choosing the right thing for your home, make sure you have done enough research. After installation if you realize that this is not what you really want then things might get difficult for you.

Using thermofilms is also a good idea as it reduces the loss of heat from inside. A combination of radiant heat and thermofilms is something really beneficial for the user as this way the heat can be evenly spread throughout. Placing sunjoy for kids during garden parties using hot rays transformed from heat rays is something really smart to do and is beneficial for the children as well as there is no harmful gas inside. So just go natural with radiant heat panels.








    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.

    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.

    THANK YOU FOR ANSWERING THOSE QUESTIONS

    NOW GIVE US A CALL AND SPEAK WITH ONE OF OUR TECHS

    866-941-5112