Unlock a 15% discount on all products with the "15%OFF" discount coupon at checkout. Hurry, as the coupon limit is available—place your order now!

Do not buy until you talk to us! We can save you cash! 1-866-941-5112

8″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″

27 December 2021

8inch Black Pipe Components 8″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″


7″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″

27 December 2021

7inch Black Pipe Components 7″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″


6″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″

27 December 2021

6inch Black Pipe Components 6″ Heat-Fab Black Slip Connector, 18″ Length, Adjusts 4″ – 16″


8″ DuraVent DuraLiner Slip Connector And Hanger

27 December 2021

8inch Class A Double Wall Components 8″ DuraVent DuraLiner Slip Connector And Hanger


8″ DuraVent DuraBlack Slip Connector With Trim, 14″ Long, 3″ to 13″ Adjustment

27 December 2021

8inch Class A Double Wall Components 8″ DuraVent DuraBlack Slip Connector With Trim, 14″ Long, 3″ to 13″ Adjustment


6″ DuraVent DuraLiner Slip Connector And Hanger

27 December 2021

6inch Class A Double Wall Components 6″ DuraVent DuraLiner Slip Connector And Hanger


6″ DuraVent DuraBlack Slip Connector With Trim, 14″ Long, 3″ to 13″ Adjustment

27 December 2021

6inch Class A Double Wall Components 6″ DuraVent DuraBlack Slip Connector With Trim, 14″ Long, 3″ to 13″ Adjustment


What is a Slip Connector

27 November 2012

What is a Slip Connector and how does it work? A Slip Connector has a female end on one end and the rest of the pipe is like a male connector, slightly smaller than the regular inside dimension of stove pipe. It will telescope from 4″ to 16″ in another pipe. For instance; you have […]


Wood

4 December 2012

If you burn wood, you probably have a dirty chimney The burning of wood produces a by-product that builds up on the inside of the flue. This black, sticky layer that forms is highly combustible. When the creosote is 1/4″ thick, you are at a high risk of having a chimney fire. The best way […]


Stove Pipe Construction

27 November 2012

Stove pipe construction is important. It can be dangerous if you connect a wood stove to a chimney liner using the wrong stove pipe.  A furnace may use 26 gauge stove pipe.  The stove pipe construction does not have to be as heavy duty for a furnace.  This is because the heat output of a […]


Summer Chores: Improving Your House During Warm Months

31 December 2009

Unlike the winter months, summer allows for you to focus on specific chores, chores that cold weather prevents you from doing. While winter is a time to focus on the inside of your house, summer directs your attention to the outside. To every season, turn turn. There is a time for war, a time for […]









    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.

    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.

    THANK YOU FOR ANSWERING THOSE QUESTIONS

    NOW GIVE US A CALL AND SPEAK WITH ONE OF OUR TECHS

    866-941-5112