Unlock a 15% discount on all products with the "15%OFF" discount coupon at checkout. Hurry, as the coupon limit is available—place your order now!

Do not buy until you talk to us! We can save you cash! 1-866-941-5112

Author: Andrew Wroblewski

Looking to save on your electricity bill, or just concerned about power use in light of environmental issues? Heating and cooling our homes is one of our biggest energy sinks, along with inefficient vehicles. By taking a few steps, you can reduce the amount of electricity you need to keep your home comfortable. You’ll save money, and be able to feel better about your impact on the environment.

The first step is making sure that your house is well insulated. Seal gaps around windows and doors, check your insulation, and repair any malfunctioning storm windows. Also, be certain to check the attic for drafts. You’ll save a lot more on heating if the cold can’t get in! A good way to check for leaks is to light a stick of incense or a candle, and hold it near windows and doors. Watch the flame or smoke and see if it’s affected by a draft. You can then caulk or weather strip any leaks you find.

Set your thermostat a little higher in summer and a little lower in winter. Most of us do not notice a five degree difference, but your electricity bill will. Five degrees can decrease your energy usage enough to save ten percent on heating and cooling.

Efficiency is important when it comes to your air conditioner and heater. Whether you have a furnace or electric heat, having it checked for efficiency and keeping the filters clean can make a big difference in your energy use. Many furnaces operate around 80% efficiency when new, but can drop as low as 40% if not maintained. The same goes for air conditioners. Keep window units clean and check for coolant leaks, and have central air conditioning maintained each year.

Use fans to circulate air. In conjunction with setting your thermostat a little higher, this will allow you to stay cool in the summer without paying a lot on your electric bill.

Install a programmable, Energy Star rated thermostat, and be sure it’s away from hot and cold areas in the house. Your thermostat should measure the average temperature in your home. Having an Energy Star thermostat could save you around a hundred dollars on energy bills per year.

If you have a fireplace, use it only for special occasions. Fireplaces are very inefficient, and you may actually lose more heat up the chimney than your fire provides. Install a fireplace insert to reduce heat loss, and be sure to close off your fireplace to keep warmth from blowing up the chimney when you do not have a fire going.

If your furnace is more than fifteen years old, consider replacing it with a new one. Technology has brought us much more efficient heating options that pay for themselves quickly through the savings they bring.

Consider a heat pump. When it’s not quite cold enough for the heater, and not quite warm enough for the air conditioner, but the house isn’t comfortable, a heat pump can adjust the temperature without the expense of running the heating or cooling systems.

About the Author:

Find out how to earn an income by teaching others how to inform people about reducing their utility bills at: Ignite and Stream Energy and explore the possibilities that energy de-regulation has created.








    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If there is a terra cotta clay flue liner, does it protrude out of
    the top of the chimney at least 2 inches? If there are at least 2
    inches and the terra cotta clay is in good condition, you will use
    our stainless steel, terra cotta top plate that has a 1 1⁄2inch edge
    that goes all the way around (like a shoebox lid).

    *If your terra cotta clay flue is in bad shape at the top, you may
    need to just take a hammer and tap all around that terra cotta,
    taking it away to make the surface flat at the top of your chimney.
    In that case, you will simply use the flat top plate that comes with
    our liner kit.



    *Note: If you have a terra cotta clay chimney
    flue lining, be sure to measure the true length and width of the
    inside of your chimney flue space.

    *If it is on the back of the stove, is it parallel with the back of the stove or is it at an angle, like 45 degrees?

    *If it is at an angle you will use an insert stove adaptor (an insert liner kit) rather than a two-part tee with cleanout cap.


    Usually pellet stoves have an exhaust hole id of 3 inches. However, if you are going up more than 15 feet to the top of your chimney you need to use a pipe and/or flex liner that is 4 inches diameter.





    If you are only venting a hot water heater then the exhaust hole diameter is probably 3 inch diameter. If it is 3 inch diameter and you are going up more than 15 feet to the top of your chimney, you must use a 4 inch diameter flexible liner or ridged pipe for proper draft. We also suggest to go ahead and use a 4 inch diameter flexible liner or ridged pipe even if the total length is 15 feet or less.


    Not the depth or any other dimension inside your fireplace.

    Most gas log fireplaces require an 8 inch liner kit or rigid kit. But do not assume that is the case for the gas log fireplace kit you are installing. Obey the requirements for that specific unit that are in your installation/instruction manual.

    THANK YOU FOR ANSWERING THOSE QUESTIONS

    NOW GIVE US A CALL AND SPEAK WITH ONE OF OUR TECHS

    866-941-5112